Dosing System and Control Equipment -
Water Treatment Services

Requirements of your water systems; cooling tower, steam raising boiler, potable and closed circuit are four common systems that benefit from controlled dosing.

Closed Circuit Dosing

• Inhibitor and biocide dosage - set to the required dosage ratio, with the inhibitor set to be proportionally dosed to the make up. Using a digital control timer, dosing pumps run for the desired duration and can be readily adjusted to suit parameters and routine monitoring of inhibitor levels 

• Stainless steel chemical dosing pots - required to feed liquid chemicals such as corrosion inhibitors into closed systems, with the stainless steel reducing micro bacteria as well as reducing friction and the energy required to pump the water around the system 

• Glycol blending units -  fully automated to make-up the supply for glycol treated water systems and maintain the pre-set blend ratio. Glycol is drawn direct from the supply container or chemical storage tank. Blended water solution is supplied at the same pressure as the incoming water supply.  

Cooling Tower Dosing and Control

• Bleed-off controls - controls the accumulation or build up of dissolved solids by recirculating water caused by evaporation, using two types of methods: conductivity and proportional bleed-off systems

• Inhibitor dosage - corrosion and scale inhibitors are dosed in proportion to the make-up to maintain a set level in the recirculating water

• Biocide dosage - using two types of methods: non-oxidising (dosed on alternating basis using timer controlled dosing pumps)or oxidising biocides (dosed continuously at low level to maintain disinfectant levels) 

• Chemical dosing pumps -  either diaphragm pumps (capable of injecting high pressures up to 20 bar) or peristaltic pumps (using system of rollers compressing a tube to create a flow)

• Towerpack units - using diaphragm pumps together with conductivity bleed-off control using electrodeless maintenance free probe